Innokin Scion Coils (3-Pack)

Buy Innokin Scion Coils (3-Pack) Australia  | Innokin Scion Coils (3-Pack) for sale 

Scion II Coils are available in resistances of 0.15 ohm (plexus coils), 0.28 ohm, 0.36 ohm (Quad core) and 0.5 ohm. The 0.15 ohm coils are rated at 60-110W, 0.36 ohm at 80-150W, while 0.2 8ohm coils are rated at 100-200W, while the 0.5 ohm coils are rated at 70-110W.

It is recommended to use high VG e-liquids like 70VG/30PG or 80VG/20PG. See our range of delicious cloud chasing e-liquids HERE.

Scion II coils kit content

• Pack of three replacement coil heads for Innokin Scion Tank
• Organic cotton wick
• Available in 0.15 ohm (Plexus coils), 0.28 ohm, 0.36 ohm (Quad) and 0.5 ohm resistances

Plexus coils

0.15 ohm Scion Plexus is a brand new mesh coil option from Innokin offering excellent stability and durability. Each Plexus replacement coil is composed of a whole KAL panel with aligned holes. This increased resistance stability translates to a more even distribution of temperature through the organic cotton which leads to less degradation and a longer coil life. The larger heating area of the Plexus mesh coil gives faster energy dissipation and heat up times resulting in ultra fast wicking and superior fuller flavours.

Scion coil power recommendation

• 0.15 Ohm Plexus coil: 60-110 Watts
• 0.28 Ohm BVC coil: 100-200 Watts
• 0.36 Ohm Quad core coil: 80-150 Watts
• 0.5 Ohm BVC coil: 70-110 Watts

Using your new Scion 2 coils

When setting up your Innokin Scion coils it is important to ensure you obtain the correct temperature to vape a given e liquid. Different e liquids have different properties so some need a higher temperature and some a lower temperature. In order to get the “sweet spot” we suggest starting at a low setting and increase that in steps of 2 watts. At some level the vapour will feel warm as you inhale and this is the approximate optimised temperature. You then need to reduce the wattage 1 step at a time for 2-3 watts and somewhere in that scale you should find your precise “sweet spot. (you may like warm vapour so you can also increase the wattage 1 or 2 watts above this point to see which you prefer and which gives the vapour level you desire. If you change e liquids or coil resistance you will then need to repeat the steps above to ensure you are hitting the e-liquid at the right temperature.)